Custom Necklace Boxes with Hinged Lids and Chain Pads

What is a necklace box?

It is a shallow case built for one problem: a chain. Left loose, a chain knots, slides and hides the pendant. A necklace box gives it a fixed path so it arrives looking the way it did on the counter.

The case is wrapped greyboard with a hinged lid. Inside sits a pad, usually dark, with a way to hook or slot the chain at the top.

Fine chains are the hardest pieces to present, because they have no shape of their own. The pad gives them one.

How does the hinged lid suit a necklace?

A wrapped hinge runs along the back edge and ties the lid to the base. It lifts like a case and stands upright, as the navy box in our first photo shows.

Nothing comes apart, so the pad is never knocked when someone puts a loose lid down. The lid rests closed on its own, and you can add a magnet or ribbon stay for a firmer hold.

A shallow case also stacks well in a drawer or a display cabinet. For the same construction in other sizes, see our range of hinged lid rigid boxes.

What size box fits a 45 cm necklace?

Lay the chain on a table in a loop with the clasp at the top and the pendant at the bottom. A 45 cm chain makes a loop roughly 70 mm across.

Add the pendant and 5 mm of margin each side, and a box about 80 to 90 mm square works for most fine pieces. Long chains of 60 cm or more fit better folded into a larger box about 160 mm square.

Height is set by the pendant. Add 5 mm above the deepest part, such as a stone or a locket, for the inside depth.

Can a necklace box hold a full set?

Yes. Our third photo shows a blue case with angled corners holding a pendant, a pair of studs and a ring on one pad.

For a set, the pad gets a slot for the ring, two holes or a slit for the earring posts, and tabs for the chain. The box is sized for the widest arrangement, usually about 150 x 120 mm.

Our second photo shows the same idea in a green textured box, with earrings and a small piece side by side on a black pad.

Keep the ring slot low on the pad and the chain tabs high, so the pendant hangs between them without touching.

Wrap, colour and pad

Greyboard forms the case, with thickness options on request. Printed or plain paper covers it, with textured and linen-look wraps as options.

Pad colour does a lot of work on a necklace box. Black, navy and deep grey make fine chains visible. A cream or white pad suits dark stones and coloured enamel.

Our pale blue photo shows another route: a soft outer colour with a grey ribbon, and a darker pad inside for contrast.

If your pieces vary, pick the pad colour that suits most of them and keep it the same on every box.

Hinged case, magnetic flap or drawer for a necklace?

All three can hold a chain. They differ in depth, in how they open and in how the piece is first seen.

Logo and finish on a shallow lid

A necklace box lid is wide and flat, so a centred foil logo sits well. Embossing or debossing gives texture without colour.

Spot UV and foil can be added, over a soft touch, matt or gloss laminated wrap. Our designers place the artwork for free on your proof.

The inside of the lid can carry your name or a short care note, which the buyer sees every time they open it.

Keep the logo away from the front edge, where thumbs lift the lid and wear the finish first.

How to order necklace boxes

Tell us the chain length, the pendant size, the pad you want and how many boxes. We send a written price for the order.

A free proof follows, with the pad layout shown. Production runs 4–6 business days from approval, and free tracked UK delivery then takes 2–3 business days.

To share the details, use the form for a written box quote, or send a photo of the piece on WhatsApp.

Most shops manage with two necklace box sizes: one for chains up to 50 cm and a larger one for long or layered pieces.